◆ Table working surface dimensions (length × width) (mm): 605 × 300
◆ Table travel (manual: longitudinal/lateral) (mm): 750 × 340
◆ Distance from table surface to underside of grinding wheel (mm): 22.5–322.5
◆ Standard chuck dimensions (mm): 600 × 300 × 75
◆ Maximum allowable workpiece mass (including chuck) (kg): 420
◆ Table longitudinal feed speed (average) (m/min): 0.3–25
◆ Manual lateral feed
◆ Handwheel feed per revolution (×1/×10/×50) (mm): 0.1/1.0/5.0
◆ Handwheel feed per graduation (×1/×10/×50) (mm): 0.001/0.01/0.05
◆ Automatic lateral feed
◆ Intermittent feed increment (mm): 0.5–20
◆ Continuous feed speed (mm/min): 0.1–1000
◆ Manual infeed
◆ Manual pulse generator (MPG) feed per revolution (×1/×10/×100) (mm): 0.01/0.1/1.0
◆ Manual pulse generator (MPG) feed per division (×1/×10/×100) (mm): 0.0001/0.001/0.01
◆ Automatic infeed amount (traverse & plunge)
◆ Rough grinding (mm): 0.0001–0.03
◆ Finish grinding (mm): 0.0001–0.03
◆ Number of spark-out passes: 0–10
◆ Rapid vertical feed speed (mm/min): 1–600
◆ Outer diameter × width × inner diameter (mm): Φ355 × 38 × Φ127
◆ Rotational speed (min⁻¹): 200–2500
◆ Power requirement (kVA): 11
◆ Footprint (mm): 2740 × 2120 × 1850
◆ Machine weight (kg): 2800

✤ In the event of any discrepancy between these specifications and the actual unit, the actual unit shall take precedence.