◆LB3000EXⅡMYC450
◆OSP-P300LA
◆Number of Controlled Axes: 4
◆Bed Swing: Φ580
◆Carriage Swing: Φ470
◆Center Distance: 470
◆Maximum Machining Diameter x Length: Φ340 x 450
◆Spindle Diameter: Φ120
◆Spindle Tip: JIS A2-6
◆Tapered Hole: Φ82 x 2°
◆Through Hole Diameter: Φ80
◆Rotation Speed ​​Conversion: Variable x Automatic 2-Stage
◆Rotation Speed: 45-5000
◆Carriage (Z-Axis) Travel: 510
◆Carriage (Z-Axis) Feed: 0.001-1000.000mm/rev
◆Carriage (Z-Axis) Rapid Feed Rate: 30,000mm/min

◆Slide (X-Axis) Travel: 260
◆X-axis Feed: 0.001 to 1000.000
◆X-axis Rapid Feed Rate: 25,000
◆Y-axis Travel: 120
◆Y-axis Feed: 0.001 to 1000.000
◆Y-axis Rapid Feed Rate: 12,500

◆Tool Post Type: V-type
◆Tool Post Number of Tools: 12
◆Tool Outer Diameter: 25mm
◆Tool Inner Diameter: 40mm
◆Rotation Speed: 45 to 6000
◆Rotation Speed ​​Conversion: Infinitely Variable
◆C-axis Control Angle: 360°
◆C-axis Rapid traverse rate: 200
◆Tailstock tapered bore: MT. No. 5
◆Tailstock travel: 515
◆Main motor: 22/15 (15 min/continuous)
◆Carriage (Z-axis): 4.6
◆Cross-slide (X-axis): 3.5
◆Y-axis: 3.5
◆Tailstock: 2.9
◆Hydraulic pump: 2.2
◆Guideway lubrication pump: 0.018
◆Coolant pump: Side discharge: 0.25, Rear discharge: 0.8

◆Total power: 27.4
◆Voltage: 200
◆Frequency: 60Hz
◆Dead-end MT No. 5
◆NC Tailstock (Inching Specification)
◆B-210A6
◆Conveyor Side
◆Touch Setter
◆Fixed Size Stopper, Flat Tip
◆Machine Height: 2250
◆Required Floor Space: Side Discharge L-Shaped Tank: 2764 x 1751
◆Net Weight: 5000

✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.