Surface grinding machine (PSG63DX)

◆ Table working surface dimensions (length x width): 605 x 300 mm
◆ Table travel (manual: longitudinal x cross): 750 x 340 mm
◆ Distance from table surface to bottom of grinding wheel
◆ For 355 mm wheel (50 Hz): 22.5–322.5 mm
◆ For 305 mm wheel (60 Hz): 47.5–347.5 mm
◆ Dimensions of standard chuck: 600 x 300 x 80 mm
◆ Allowable workpiece mass (including 100 kg chuck mass): 420 kg
◆ Table
◆ Longitudinal feed speed (average): 0.3–25 m/min
◆ Longitudinal feed per handwheel revolution: 47 mm
◆ Cross manual feed
◆ Feed per handwheel revolution: 5.0 mm
◆ Feed per dial graduation: 0.02 mm
◆ Cross automatic feed
◆ Intermittent feed: 0.5–20 mm
◆ Continuous feed: 0.1–1.0 m/min
◆ Wheel head
◆ Automatic downfeed amount (traverse & plunge) Infeed
◆ Rough grinding: 0.001–0.03 mm (12 steps)
◆ Finish grinding: 0.0001–0.01 mm (11 steps)
◆ Manual infeed
◆ Feed per handle rotation (×0.1/×1/×10): 0.01/0.1/1.0 mm
◆ Feed per dial graduation (×0.1/×1/×10): 0.0001/0.001/0.01 mm
◆ Spark-out passes: 0–5
◆ Vertical rapid traverse speed: 600 mm/min
◆ Grinding wheel
◆ Outer diameter (50Hz/60Hz) × Width × Inner diameter: Φ355/305 × 38 × Φ127 mm
◆ Rotational speed (50Hz/60Hz): 1500/1800 min⁻¹
◆ Power requirement (including chuck and optional coolant system): 10 kVA
◆ Machine height: 1808 mm
◆ Width × Depth: 2737 × 1929 mm
◆ Machine mass: Approx. 2500 kg

✤ In the event of any discrepancy between the specifications and the actual machine, the actual machine takes precedence.