Flat type NC lathe (MG65×290)

◆Swing on the bed: 750 (29.5”)
◆Swing on the carriage: 360 (14.17”)
◆Distance between centers: 3000mm
◆Maximum processing length: 2850
◆Shape of spindle end: JIS A1-11
◆Diameter of main shaft front bearing: Φ140 (5.5”)
◆Spindle through hole diameter: 85mm (3.34”)
◆Spindle taper hole diameter: 1/10 Meter Taper No.100
◆Center: M.T.No.5
◆Spindle rotation speed: Automatic 3 groups stepless 3-1800rpm
◆X/Z rapid traverse speed: 6/9(~200),6(250~)m/min
◆X/Z axis movement distance: 380(14.96”)/3000
◆Width of horizontal feed table: 280mm (11”)
◆Bed dimensions: W480 x D4850 ​​x H735
◆Tailstock shaft diameter: Φ100mm
◆Center hole diameter: M.T.No.5
◆Tailstock shaft movement distance: 150mm (5.9”)
◆Machine weight: 7000kg

<Standard accessories>
・Numerical control device (FANUC SYSTEM interactive CAPⅡ): 1 set
・Main motor (AC15/11kw) and electrical equipment: 1 set
・Center sleep: 1 piece
・Center angle 60° M.T.No.5: 1 piece
・Four-jaw chuck (500Φ)
・Operation cover (front): 1 set
・Rear cover: 1 set
・Tools (spanner and wrench): 1 set
・Basic bottle, nut, bottom plate: 1 set
・Lighting light: 1 set
・Hydraulic tailstock shaft: 1 set
・Square automatic turret: 1 set
・Cutting oil device: 1 set
・Hydraulic unit (including headstock automatic transmission): 1 set

<Special accessories>
・Chip conveyor (directly below the bed)

✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.