NC lathe (LB-200C)
k-smk.co.jp/en/machines/20101082/
この商品情報に写真は見つかりませんでした。
| 分類 | NC Lathe |
|---|---|
| メーカー | Okuma |
| 保管場所 | Each sites |
| 型式 | LB-200C |
| 年式 | 2001 |
| 管理番号 | 20101082 |
◆Control device: OSP-E100L
◆Swing on the bed: Φ530
◆Swing on the carriage: Φ420
◆Distance between centers: 300
◆Maximum processing diameter: Φ230
◆Maximum processing length: 300
◆Travel amount: X180, Z335
◆Spindle rotation speed: 50 to 6000
◆Number of spindle speed ranges: Stepless x automatic 2 steps (VAC motor winding switching)
◆Spindle end: flat Φ×140
◆Spindle through hole diameter: Φ53
◆Spindle bearing inner diameter: Φ80
◆Turret type: V12NC turret
◆Number of tools installed on the turret: L12
◆Shank height of square tool: 20
◆Boring bar shank diameter: Φ32
◆Turret indexing time: 0.1 (index)
◆Fast forward speed: X25, Z30
◆Cutting feed rate: XZ0.001~1,000,000
◆Tailstock shaft diameter: Φ55
◆Tapered hole type of tailstock shaft: MT.No.4
◆Travel amount of tailstock shaft: 80
◆Spindle motor: VAC 7.5/5.5
◆Feed shaft electric motor: X, BL3/Z, BL4
◆Electric motor for cutting fluid: Side discharge of chips 0.25, Rear discharge 0.8
◆Required power supply: 16
◆Machine dimensions: W1985 x D1620 x H1700
◆Machine mass: 3300
✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.