NC lathe (LB-300MY)
k-smk.co.jp/en/machines/20101081/
| 分類 | NC Lathe |
|---|---|
| メーカー | Okuma |
| 保管場所 | Head office. Machine Plaza |
| 型式 | LB-300MY |
| 年式 | 2003 |
| 管理番号 | 20101081 |
◆Control device: OSP-E100L
◆Swing on the bed: Φ530
◆Swing on the carriage: Φ410
◆Distance between centers: 500
◆Maximum processing diameter: Φ340
◆Maximum processing length: 480
◆Travel amount: X280, Y120, Z500, C360°
◆Spindle rotation speed: 45 to 4500
◆Number of spindle speed ranges: 2 automatic steps
◆Spindle end: JIS A2-6
◆Spindle through hole diameter: Φ62
◆Spindle bearing inner diameter: Φ100
◆Chuck: Kitagawa B-206, 8 inches
◆Turret type: Composite V12NC turret
◆ Number of tools installed on the turret: 12 for L.M common
◆Boring bar shank diameter: Φ40
◆Rotary tool spindle rotation speed: 45 to 4500min-1
◆Number of rotary tool spindle speed ranges: 2 automatic steps
◆Rapid traverse speed: X20000, Y10000, Z25000, 200min-1
◆Cutting feed rate: XYZ0.0001~1000000
◆Tailstock shaft diameter: Φ90
◆Tailstock shaft taper hole type: MT NO.5
◆Travel amount of tailstock shaft: 120
◆Spindle motor: VAC-15/11
◆Electric motor for rotating tool spindle: PREX7.0/3.3
◆Feed shaft electric motor: X, BL4/Y, BL6/YS, BL3
◆Required power source: 25kVA
◆Machine dimensions: W2200×D1720×H2200
◆Machine mass: 6000kg
✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.